Dimensions

• Multiple widths
• 1/16" thick (1.58 millimeters)
• 200' length (60.96 meters)

Highlights

• V9062 Medium Density
• ASTM D3574 PSI 85
• UL Listed as an electrical component UL746C 
• 2-sided acrylic adhesive
• Conformable foam distributes stress forces
  
• 30 PCF Density
• Recommended service temperature is between -30°F to 200°F 
• Natural (off white) color foam with white polyethylene liner
  

Description

Presbond offers rolls of V9062 Norseal® Polyurethane foam bonding tape. These tapes are ideal for a multitude of high performance applications that require UL 746C rating such as circuit board mounts and electrical wire harnesses. The Norseal V9000 exhibits superior adhesion to a variety of surfaces either painted or unpainted. V9000 Norbond polyurethane bonding foam is the ideal solution for replacing or installing appliance emblems, signs, kick panels, circuit board mounts, electrical wire harness clips, and interior trim and ornamentation.

Technical Specs 

Click the link above to view adhesion properties to steel, static shear performance and physical properties such as elongation, water absorption, flammability and more.

Applications

Application Notes

Ensure bonding surfaces are well unified, clean, dry and free of dirt and oils. Apply a uniform pressure of 15 psi (103 kPa) to promote good contact between the material to be bonded and the tape The application temperature should be between 60°F and 125°F (16°C to 52°C). It is not recommended to apply these tapes at temperatures below 60°F (16°C), as the adhesive does not flow in this condition and can result in poor bonding.

The adhesion between the substrate and the tape increases with time, typically reaching final bond strength in 72 hours. Heating the product above 105°F (40°C) will accelerate the adhesion process.

LEGAL DISCLAIMER