3/8" x 6 Ft. Foam Pipe Insulation Tube, 1" Wall
Free Shipping on Orders Over $50
Free UPS or Fed Ex Ground Shipping available on orders over $50. Continental U.S. Destinations only.
We comply with the Buy American Act requirements.
3/8" (Insulation Nominal I.D) x 1" wall x 72" (6 Ft)
Copper Tube Size (Nominal I.D Plumbing) - 1/4"
Copper Tube Size (O.D HVAC/R) - 3/8"
Pipe Insulation Tubing is comprised of an NBR/PVC based closed cell, flexible elastomeric foam insulation. It is environmentally friendly as it is free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA-registered antimicrobial agent is incorporated into the product providing additional protection against mold, fungal and bacterial growth. It is UL GREENGUARD Gold Certified for low VOC emissions. The product’s key physical properties are approved by Factory Mutual.
ASTM C 534 Type 1 Tubing; ASTM D 1056-00-2C1; New York City MEA 186-86-M Vol. IV; USDA Requirements; Meets requirements of ASTM C 411 (Test Method for Hot Surface performance of High Temperature Thermal Insulation); Meets requirements of UL 181 sections 11.0 and 16.0 (Mold Growth/Air Erosion); MIL-P-15280 For T (Tubing); UL 94-5V Flammability Classification (Recognition # E300774); ASTM E84 1-1/2 in 25/50 Tested according to UL 723 and NFPA 255; Complies with requirements of CAN/ULC S102-M88; FMRC 2006 Approval Guide Chapter 14 Pipe Insulation; NFPA No 101 Class A Rating; Meets requirements of NFPA 90A Sect 2.3.3 for Supplementary materials for Air Distribution Systems.
FLAME SPREAD / SMOKE DEVELOPMENT
<25/50 (ASTM E84)
HOT SURFACE PERFORMANCE
No Cracking or Delamination (ASTM C411)
OPERATING TEMPERATURE RANGE
-297°F* (-183°C) to +220°F (+104°C)** (ASTM C534)
*For applications below -40°F (-40°C), contact us for support
**Intermittent temperature “spikes” to 250°F (121°C)
THERMAL CONDUCTIVITY 75°F (24°C) MEAN TEMP
0.245 (0.0353) (ASTM C 177)
UV / WEATHER RESISTANCE
Pass (QUV Chamber Test)
Outdoor applications should be protected with an approved coating or cladding.
WATER VAPOR PERMEABILITY (DRY CUP: ELASTOMERIC INSULATION)
<0.01 perm-in (ASTM E96)
3-6 lb/ft3 (ASTM D 1667)
Compliance and Restrictions
- WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov