Viton® Fluoroelastomer 1/8" Thick x 1/4" Wide x 56" Length, Acrylic PSA
Free Shipping on Orders Over $50
Free UPS or Fed Ex Ground Shipping available on orders over $50. Continental U.S. Destinations only.
We comply with the Buy American Act requirements.
Dimensions
- 1/4" wide
- 1/8" thick
- 56" (4.66 feet)
Highlights
- Acrylic Pressure Sensitive Adhesive 1-Side
- Viton Type A
- Closed Cell Foam
- 19 PCF Density
- Temperature range of -10°F - +400°F
- Resists acids, chemicals, fuel and oil
- Pressure sensitive acrylic adhesive exhibits high initial grab
- Provides a long lasting, permanent bond
- Lightweight and highly compressible
Technical Specs
Click the link above to view adhesion properties to steel, static shear performance and physical properties such as elongation, water absorption, flammability and more.
Description
Viton® fluoroelastomer offers excellent resistance to corrosive environments. Viton is highly resistant to boric acid, isopropyl alcohol, fuel, and oil. Temperature range of -10° to 400° F for the foam and -40° to 350° F on the acrylic based pressure sensitive adhesive.
The ASTM D1056 2B2 specification Viton foam strips, die cuts, and sheets meet the most demanding of applications.
Applications
- High Performance Sealing
- Thermal Insulation
- Automotive
- Fluid Power
- Appliances
Application Notes
Ensure bonding surfaces are well unified, clean, dry and free of dirt and oils. Apply firm and even pressure to improve adhesive-to-surface contact. Allow proper temperature and time to enhance bond strength as adhesive flows onto the surface.
Compliance and Restrictions
- WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov