Saint-Gobain® Norbond® V8800 x 1/4" Width
Free Shipping on Orders Over $50
Free UPS or Fed Ex Ground Shipping available on orders over $50. Continental U.S. Destinations only.
We comply with the Buy American Act requirements.
- 1/4" wide (6.35 millimeters)
- 1/32" thick (0.79 millimeters)
- 60' length (18.28 meters)
- Repositionable (repositioning of parts depends on time, temperature, and pressure)
- 2-sided acrylic adhesive
- Good low temperature flexibility
- 30 PCF Density
- Recommended service temperature is between -30°F to 200°F (-34°C to 93°C)
- Low density green polyethylene liner
Presbond offers rolls of V8800 Norbond® Polyurethane foam bonding tape. These tapes are ideal for a multitude of joining applications and transportation bonding. The Norbond V8830 exhibits superior adhesion to stainless steel, painted steel, polycarbonates and acrylics. This polyurethane foam is extremely weather resistant while providing the ultimate high bond that strengthens over time which allows the installer to reposition parts. Repositioning of parts depends on time, temperature, and pressure.
Click the link above to view adhesion properties to steel, static shear performance and physical properties such as elongation, water absorption, flammability and more.
- Sign Frames
- Appliance emblems
Ensure bonding surfaces are well unified, clean, dry and free of dirt and oils. Apply a uniform pressure of 15 psi (103 kPa) to promote good contact between the material to be bonded and the tape The application temperature should be between 60°F and 125°F (16°C to 52°C). It is not recommended to apply these tapes at temperatures below 60°F (16°C), as the adhesive does not flow in this condition and can result in poor bonding.
The adhesion between the substrate and the tape increases with time, typically reaching final bond strength in 72 hours. Heating the product above 105°F (40°C) will accelerate the adhesion process.
Compliance and Restrictions
- WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov